Quality Aroma Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.
Customer Service Hotline:
+8613261677119
Quality Aroma Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.+8613261677119
TL;DR - The Mistairhome WL-AH01B (PLUS) holds 305 mL and mists 40 mL per hour or 18.5 mL per hour, which is 7.6 hours and 16.5 hours per fill; the oil side takes 3.1 mL and runs 12.9 hours per fill at 0.24 mL per hour; it covers 14 sq m (154 sq ft) at a 2.6 m ceiling and measures 23.4 dB on the high step and 20.6 dB on the sleep step; it draws 2.8 W and takes its supply from USB-C 5V/1A, runs from a laptop port or a phone charger; separate oil tray above the water line, so the oil never reaches the disc or the tank; the humidistat holds target band 30 to 75 percent in 5 percent steps, held within 3 percent over Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing, and iOS 14 or later and Android 9 or later, scent and mist scheduled separately, voice runs through Amazon Alexa and Google Home for on off, mist step and scent step; no internal cell on this build; it weighs 414 g and measures 12.6 x 12.6 x 18.4 cm, and ships documented to CE / RoHS / FCC standards for import into Germany. MOQ is 200 units per SKU with a 25-35-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Bedroom Aroma Humidifier with Night Light category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH01B-PLUS:
| Misting method | Ultrasonic piezo disc at 2.4 MHz on a floating silicone isolator, cool mist, no heater in the path |
| Tank capacity | 305 mL |
| Mist output on the high step | 40 mL per hour |
| Mist output on the low step | 18.5 mL per hour |
| Run time per fill on the high step | 7.6 hours |
| Run time per fill on the low step | 16.5 hours |
| Coverage area | 14 sq m (154 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 23.4 dB |
| Noise at 1 m on the sleep step | 20.6 dB |
| Scent delivery method | Separate oil tray above the water line, so the oil never reaches the disc or the tank |
| Oil tray capacity | 3.1 mL |
| Oil contact parts | PP tray with a silicone seal, both rated for citrus, eucalyptus and tea tree blends |
| Scent intensity control | Three intensity steps, and scent can run with the mist switched off |
| Scent run time per tray fill | 12.9 hours |
| Oil use per hour | 0.24 mL per hour |
| Water type | Tap water or distilled in the tank; a demineralisation cartridge drops into the filler neck |
| Mineral dust handling | Cartridge optional, recommended wherever the supply is hard |
| Fill method | Top fill through a 58 mm opening, filled in place from a jug |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/1A, runs from a laptop port or a phone charger |
| Rated power on the high step | 2.8 W |
| Control interface | Touch strip with three mist steps, scent off, a two, four or eight hour timer |
| Network link | Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing |
| App platform | iOS 14 or later and Android 9 or later, scent and mist scheduled separately |
| Voice assistant support | Amazon Alexa and Google Home for on off, mist step and scent step |
| Humidistat range and accuracy | target band 30 to 75 percent in 5 percent steps, held within 3 percent |
| Scheduling | Seven day schedule with four events per day, states restored after a power cut |
| Night light | Warm ring below 4 lux with a seven-colour cycle, dimmable to fully dark |
| Protection | Dry-run shut-off by tank float, tilt switch, overcurrent limit on the adapter |
| Dimensions | 12.6 x 12.6 x 18.4 cm |
| Weight | 414 g |
| Warranty | 12 months |
| Shipped kit | Plus build, + 10 mL starter oil set + hard carry case + wick and cartridge starter set + gift box + funnel |
| Units per master carton | 30 |
| Lead time | 25-35 days |
Three things move this category in Germany: heated or cooled air that dries a room faster than people expect, a home fragrance habit that has moved from candles to appliances, and a cleaning task that decides whether the product is still in use by March. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
For the Bedroom Aroma Humidifier with Night Light segment the deciding specifications are whether the oil stays out of the water path, whether the scent step can be turned down far enough for a shared room, and what the unit does with dissolved minerals. Peak mist volume ranks below all three, which surprises first-time buyers. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Germany through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
The decision that matters most in this category is not output, it is what the unit does with dissolved minerals, and it is the one most often sold badly. An ultrasonic disc atomises water, and with it everything dissolved in that water, so on a hard supply the minerals become airborne and settle as a fine white film on whatever is nearby. Two answers exist and we build both: a demineralisation cartridge in the tank, which is a consumable with a real working life, or a scented build run on distilled water in markets where the supply is known to be hard.
The second decision is the cleaning path, which is an engineering decision long before it is a marketing one. Standing water at room temperature grows biofilm, and a tank with oil residue in it grows it faster, so the honest interval is every five to seven days in continuous use and every three to four days where a scent is run daily. A tank a hand cannot reach into is a tank that never gets cleaned properly, which is why the openings on this range are sized for a hand and a brush rather than for a photograph.
The third is the control loop. A fixed mist step ignores the room entirely, so a sealed room overshoots while a draughty one never arrives, and a scented room that overshoots is a room that smells wrong. A humidistat with a stated target band, fed by a sensor calibrated at the factory and re-checkable by the buyer with an ordinary hygrometer, is the difference between a product that holds a number and one that merely runs. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
Three deployment records from the Bedroom Aroma Humidifier with Night Light programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A business hotel with 70 rooms running generator power for part of every day
Timing: One year from June 2025
Generator hours are the specification in this market, and the hotel's first question was whether the unit would survive a changeover twice a day. It does, because the control board stores its state and the shut-off is hard-wired rather than firmware, but the honest note is about the adapter: a cheap one fails within weeks. Seventy units went in with wide-input adapters and not one has come back for an electrical fault.
Deployment: A 19th-century canal warehouse rebuilt as a shared office for 14 small studios
Timing: One year from March 2025
Fourteen studios with fourteen opinions is the hardest kind of site to specify, and the solution was boring: every unit runs water only, and the scent question was removed from the shared areas entirely. Where scent did go in was the ground-floor meeting room, on a timer, switched by whoever books it. The lesson we now pass on is that shared space and scent rarely mix, and a programme that can run unscented is worth more to a landlord than one that cannot.
Deployment: A 34-storey apartment with ondol underfloor heating and a combined living and sleeping room
Timing: One heating season from December 2024
Ondol heating dries a room from the floor up and the family here had a child with a night cough, which is the most common reason a Korean buyer enters this category. The specification that worked was a scheduled night run - on at 21:00, off at 07:00 - with the tray left empty for the first month while the family checked whether the cough changed. It did, the scent went in during the second month, and the schedule has never been touched since.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC10-GIFT | Boxed sets bought to be given, where the packaging carries the decision | A box that survives the shelf and a manual in the buyer's language | A gift configuration with an oil starter set, printed artwork and a multilingual leaflet, packed to a drop-test standard rather than to a catalogue photograph. |
| SC05-TREATMENT | Rooms booked back to back, where the scent has to leave before the next client | A scent that clears between appointments rather than building up | Scent and mist run on separate timers, so the room can be scented for a session and cleared with plain mist before the next client arrives. |
| SC01-BEDTIME | Master bedrooms where the scent is part of the wind-down routine | A scent that fades before the sleeper notices it, and a tank that lasts the night | A scheduled step-down holds output low overnight, the light goes fully dark, and the tray runs out of oil around the time the sleeper does. |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 18.5 mL per hour at 20.6 dB, holding 16.5 hours per fill and 12.9 hours of scent across a 14 sq m (154 sq ft) room.
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which seal and which tray is inside the unit, and what each of them costs to replace. That matters more here than in most categories, because the parts that wear are the parts that meet the oil, and they are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a seal or a pad loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, and we will decline a resin-heavy oil programme on a chassis with standard silicone seals, because both configurations produce a return rate rather than a reorder. A factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the scent, and a hospitality or childcare buyer will ask about the oil before it asks about EMC. We hold the IFRA statement, the allergen declaration and the MSDS per blend, plus a flash point figure for the transport classification, and those four are the documents that most often decide a hotel or clinic order.
The third is the battery and oil overlay together. Where a cell is fitted and an oil set ships in the retail box, both sit on top of the appliance documentation and each adds a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list and the full oil list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 18.5 mL per hour at 20.6 dB, holding 16.5 hours per fill and 12.9 hours of scent across a 14 sq m (154 sq ft) room.
Order sizing in this category is a volume question before it is a quantity question, because the units differ in size by more than an order of magnitude across the range. A master carton of this model holds 30 units at 0.112 cubic metres, which puts roughly 5,700 units in a 20 ft container and 12,540 units in a 40 ft container on a pure volume basis.
That figure is the starting point, not the answer. Palletisation, loading losses and the mix of SKUs in the container all pull it down, and a mixed container across three SKUs will not hit the single-SKU number. We run the mix with the buyer before quoting freight, because the difference between a planned and an unplanned container is usually one extra shipment a season.
The second sizing decision is the spares and consumables ratio, which most first-time buyers set too low. One spare disc per twenty units, a cartridge per unit on hard water and a pad set per unit per year is the ratio that prevents the awkward second shipment, and the parts are cheap enough that over-ordering them costs less than the freight of a top-up. Where oil ships in the box, the oil line is quoted separately because its transport classification is not the appliance's. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH01B-PLUS.
Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on pp tray with a silicone seal, both rated for citrus, eucalyptus and tea tree blends, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH01B the tray is 3.1 mL and lifts out for washing.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge optional, recommended wherever the supply is hard.
Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH01B, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 3.1 mL in the tray and uses 0.24 mL per hour on the step quoted, which works out at 12.9 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the three intensity steps, and scent can run with the mist switched off let the site set how much of that dose the room actually gets.
What warranty and spares support do you provide?
12 months against manufacturing defect on WL-AH01B. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On Germany shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 25-35 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment or home-fragrance shelf, brand owners who want a chassis they can put their own artwork on, gift and fragrance companies planning an oil line alongside the appliance, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents, and in this category the returns arrive as swollen seals and filmed discs rather than as dead appliances. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
A first order runs in five steps and none of them need to be slow. The first is the specification: which chassis, which SKU build, and which markets, because the market list decides the documentation. The second is sampling, 5 to 7 working days from an existing specification or 15 to 20 if a custom colour is required.
The third is the paperwork - certificates, manuals, artwork, the battery files where a cell is fitted and the oil declarations where oil ships - and it runs in parallel with the second rather than after it, which is where most of the time is either saved or lost. The fourth is production, measured from order confirmation and deposit. The fifth is booking, which is where a battery build or an oil set needs its extra few days.
What we ask a buyer to decide before step one is which consumables and which oil travel with the appliances, because that choice affects the packing list, the freight classification and the lead time, and changing it later costs a second shipment. The WL-AH01B (PLUS) packs 30 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.8 W on the high step.
If there is one thing to take from this page, it is that the oil path and the water answer are the two that decide the return rate, and both can be checked before an order is placed. Lift the tray on a sample and look at what the oil touches, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, oil use, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, fragrance and gift companies, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-AH01B (PLUS) the figures worth carrying into the next order are the 305 mL tank, the 12.9 hours of scent per oil fill, and the 20.6 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
