Quality Aroma Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.
Customer Service Hotline:
+8613261677119
Quality Aroma Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.+8613261677119
TL;DR - The Mistairhome WL-AH05C (PLUS) holds 205 mL and mists 30 mL per hour or 14.0 mL per hour, which is 6.8 hours and 14.6 hours per fill; the oil side takes 1.6 mL and runs 6.7 hours per fill at 0.24 mL per hour; it covers 11 sq m (115 sq ft) at a 2.6 m ceiling and measures 25.4 dB on the high step and 22.6 dB on the sleep step; it draws 2.1 W and takes its supply from USB-C 5V/1A, with a 12 V lighter adapter on the fleet build; felt pad in the lid, two to three drops, replaced when the scent changes; the humidistat holds target band 40 to 65 percent in 5 percent steps, held within 5 percent from the controls on the unit, with every setting stored on the unit, no voice path on this chassis; 1000 mAh lithium polymer, giving 3.0 hours per charge on the low mist step; it weighs 193 g and measures 7.4 x 7.4 x 12.8 cm, and ships documented to CE / RoHS / FCC standards for import into Saudi Arabia. MOQ is 200 units per SKU with a 25-35-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Aroma Humidifier Easy Clean category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH05C-PLUS:
| Misting method | Ultrasonic piezo micro-disc at 2.4 MHz with a baffled outlet aimed at the cabin |
| Tank capacity | 205 mL |
| Mist output on the high step | 30 mL per hour |
| Mist output on the low step | 14.0 mL per hour |
| Run time per fill on the high step | 6.8 hours |
| Run time per fill on the low step | 14.6 hours |
| Coverage area | 11 sq m (115 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 25.4 dB |
| Noise at 1 m on the sleep step | 22.6 dB |
| Scent delivery method | Felt pad in the lid, two to three drops, replaced when the scent changes |
| Oil tray capacity | 1.6 mL |
| Oil contact parts | Felt pad in a PP holder; the shell is UV-stabilised ABS for a dashboard |
| Scent intensity control | One output level, because a stronger scent in a closed cabin is unpleasant |
| Scent run time per tray fill | 6.7 hours |
| Oil use per hour | 0.24 mL per hour |
| Water type | Distilled or bottled; a small disc and a hot dashboard are a scaling combination |
| Mineral dust handling | Cartridge not fitted; bottled water keeps the disc alive through a summer |
| Fill method | Twist-off base filled at a tap, sealed before it goes back in the holder |
| Battery pack | 1000 mAh lithium polymer |
| Cordless run time | Up to 3.0 hours per charge on the low mist step |
| Charge time | 1.8 hours from empty |
| Power input | USB-C 5V/1A, with a 12 V lighter adapter on the fleet build |
| Rated power on the high step | 2.1 W |
| Control interface | One button on the top face, long press for the light, no menu |
| Network link | no radio on this build, start and stop are on the unit |
| App platform | no app on this build, the unit is set once and left in the holder |
| Voice assistant support | no voice assistant in a vehicle build |
| Humidistat range and accuracy | target band 40 to 65 percent in 5 percent steps, held within 5 percent |
| Scheduling | Two or four hour run timer with an auto stop when the disc runs dry |
| Night light | Single warm dot, and it can be switched off entirely for night driving |
| Protection | Dry-run shut-off, tilt switch, sealed cap, cell overcharge cut-out |
| Dimensions | 7.4 x 7.4 x 12.8 cm |
| Weight | 193 g |
| Warranty | 12 months |
| Shipped kit | Plus build, + 10 mL starter oil set + hard carry case + wick and cartridge starter set + gift box + funnel |
| Units per master carton | 80 |
| Lead time | 25-35 days |
Three things move this category in Saudi Arabia: heated or cooled air that dries a room faster than people expect, a home fragrance habit that has moved from candles to appliances, and a cleaning task that decides whether the product is still in use by March. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Returns in the Aroma Humidifier Easy Clean category cluster around three causes: mineral dust on hard water, a scent that is stronger than the room wants, and a tray that cannot be cleaned. All three are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Saudi Arabia through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
The decision that matters most in this category is not output, it is what the unit does with dissolved minerals, and it is the one most often sold badly. An ultrasonic disc atomises water, and with it everything dissolved in that water, so on a hard supply the minerals become airborne and settle as a fine white film on whatever is nearby. Two answers exist and we build both: a demineralisation cartridge in the tank, which is a consumable with a real working life, or a scented build run on distilled water in markets where the supply is known to be hard.
The second decision is the cleaning path, which is an engineering decision long before it is a marketing one. Standing water at room temperature grows biofilm, and a tank with oil residue in it grows it faster, so the honest interval is every five to seven days in continuous use and every three to four days where a scent is run daily. A tank a hand cannot reach into is a tank that never gets cleaned properly, which is why the openings on this range are sized for a hand and a brush rather than for a photograph.
The third is the control loop. A fixed mist step ignores the room entirely, so a sealed room overshoots while a draughty one never arrives, and a scented room that overshoots is a room that smells wrong. A humidistat with a stated target band, fed by a sensor calibrated at the factory and re-checkable by the buyer with an ordinary hygrometer, is the difference between a product that holds a number and one that merely runs. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
Three deployment records from the Aroma Humidifier Easy Clean programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A serviced apartment tower, 120 units, glass curtain wall, air conditioning all year
Timing: One year from May 2025
Year-round air conditioning means year-round dryness, and the tower's brief was unusual: a target of 45 percent held across every unit, checked quarterly by the facilities team with a calibrated meter. Units that drifted more than 5 percent from the reading were pulled. Four failed that check in the first quarter, all of them at the sensor rather than the disc, and all four were replaced under warranty without an argument, which is why the tower reordered.
Deployment: A terrace of 1880s brick flats retrofitted with mechanical ventilation and underfloor heating
Timing: Two winters from October 2024
Mechanical ventilation is the detail that decides everything in a retrofit, because it removes moisture continuously and no tank size chosen from a floor area accounts for it. The flats that worked were the ones where the unit was placed in the bedroom with the door shut, not the ones where a single large unit sat in the hall. Ventilation rate beats tank capacity, and a buyer who asks about the air changes before asking about litres will get the sizing right the first time.
Deployment: A thermal bath complex with a treatment wing, tiled throughout, high ambient humidity
Timing: Fourteen months from February 2025
The treatment wing is already at 60 percent and does not need humidifying at all, which is the part most suppliers get wrong when they see 'spa' on an enquiry. What the complex wanted was scent in the dry relaxation rooms and nothing in the wet areas, and the specification was a unit that can hold a target and stop when the room is already there. Fourteen units went in, of which eleven spend most of the day idle by design, and that is the correct outcome.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC04-RECEPTION | Entrance desks and waiting areas judged in the first ten seconds | A consistent first impression that does not depend on who is on shift | A burst mode runs the scent for thirty minutes either side of opening, then drops to a maintenance step nobody has to remember. |
| SC09-HALL | Open-plan lobbies with a ceiling well above a residential one | Output sized against volume, with a target rather than a step | A large-tank chassis holds a measured target and stops when the room arrives, which is the only way a tall space is controlled rather than merely filled. |
| SC05-TREATMENT | Rooms booked back to back, where the scent has to leave before the next client | A scent that clears between appointments rather than building up | Scent and mist run on separate timers, so the room can be scented for a session and cleared with plain mist before the next client arrives. |
| SC10-GIFT | Boxed sets bought to be given, where the packaging carries the decision | A box that survives the shelf and a manual in the buyer's language | A gift configuration with an oil starter set, printed artwork and a multilingual leaflet, packed to a drop-test standard rather than to a catalogue photograph. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 14.0 mL per hour at 22.6 dB, holding 14.6 hours per fill and 6.7 hours of scent across an 11 sq m (115 sq ft) room.
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which seal and which tray is inside the unit, and what each of them costs to replace. That matters more here than in most categories, because the parts that wear are the parts that meet the oil, and they are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a seal or a pad loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, and we will decline a resin-heavy oil programme on a chassis with standard silicone seals, because both configurations produce a return rate rather than a reorder. A factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the scent, and a hospitality or childcare buyer will ask about the oil before it asks about EMC. We hold the IFRA statement, the allergen declaration and the MSDS per blend, plus a flash point figure for the transport classification, and those four are the documents that most often decide a hotel or clinic order.
The third is the battery and oil overlay together. Where a cell is fitted and an oil set ships in the retail box, both sit on top of the appliance documentation and each adds a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list and the full oil list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 14.0 mL per hour at 22.6 dB, holding 14.6 hours per fill and 6.7 hours of scent across an 11 sq m (115 sq ft) room.
Order sizing in this category is a volume question before it is a quantity question, because the units differ in size by more than an order of magnitude across the range. A master carton of this model holds 80 units at 0.071 cubic metres, which puts roughly 23,760 units in a 20 ft container and 52,320 units in a 40 ft container on a pure volume basis.
That figure is the starting point, not the answer. Palletisation, loading losses and the mix of SKUs in the container all pull it down, and a mixed container across three SKUs will not hit the single-SKU number. We run the mix with the buyer before quoting freight, because the difference between a planned and an unplanned container is usually one extra shipment a season.
The second sizing decision is the spares and consumables ratio, which most first-time buyers set too low. One spare disc per twenty units, a cartridge per unit on hard water and a pad set per unit per year is the ratio that prevents the awkward second shipment, and the parts are cheap enough that over-ordering them costs less than the freight of a top-up. Where oil ships in the box, the oil line is quoted separately because its transport classification is not the appliance's. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH05C-PLUS.
Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on felt pad in a pp holder; the shell is uv-stabilised abs for a dashboard, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH05C the tray is 1.6 mL and lifts out for washing.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge not fitted; bottled water keeps the disc alive through a summer.
Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH05C, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 1.6 mL in the tray and uses 0.24 mL per hour on the step quoted, which works out at 6.7 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the one output level, because a stronger scent in a closed cabin is unpleasant let the site set how much of that dose the room actually gets.
What warranty and spares support do you provide?
12 months against manufacturing defect on WL-AH05C. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On Saudi Arabia shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 25-35 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment or home-fragrance shelf, brand owners who want a chassis they can put their own artwork on, gift and fragrance companies planning an oil line alongside the appliance, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents, and in this category the returns arrive as swollen seals and filmed discs rather than as dead appliances. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
A first order runs in five steps and none of them need to be slow. The first is the specification: which chassis, which SKU build, and which markets, because the market list decides the documentation. The second is sampling, 5 to 7 working days from an existing specification or 15 to 20 if a custom colour is required.
The third is the paperwork - certificates, manuals, artwork, the battery files where a cell is fitted and the oil declarations where oil ships - and it runs in parallel with the second rather than after it, which is where most of the time is either saved or lost. The fourth is production, measured from order confirmation and deposit. The fifth is booking, which is where a battery build or an oil set needs its extra few days.
What we ask a buyer to decide before step one is which consumables and which oil travel with the appliances, because that choice affects the packing list, the freight classification and the lead time, and changing it later costs a second shipment. The WL-AH05C (PLUS) packs 80 units to a carton, carries 12 months of warranty cover and a 25-35-day stated lead time, and draws 2.1 W on the high step.
If there is one thing to take from this page, it is that the oil path and the water answer are the two that decide the return rate, and both can be checked before an order is placed. Lift the tray on a sample and look at what the oil touches, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, oil use, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, fragrance and gift companies, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-AH05C (PLUS) the figures worth carrying into the next order are the 205 mL tank, the 6.7 hours of scent per oil fill, and the 22.6 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
